Venturi Tube Flow Meter
Venturi Tube Flow Meter, also called Classical Venturi Tube, is a Classical design differential pressure flow device.
The Venturi tube is used for the measurement of gas and fluid flow, in which there is low-pressure loss primary requirement.
According to the type of production, there are:
classical Venturi tubes with the cast, or machined or welded confuter.
|NO.||SI-Venturi Tube Flow Meter|
|Product Origin||Shaanxi, China|
|Lead Time||3-5 days after payment received|
|Species||Nominal diameter DN(mm)||Aperture ratio(β=d/D)||Nominal pressure PN(MPa)||Reynolds number||Material||Send|
|Casting contraction section venturi tube||100~800||0.3~0.75||2.5||2 ×105~2×106||cast iron||RFQ|
|Mechanical shrinkage section Venturi tube||50~350||0.4~0.75||4||2 ×105~2×106||Carbon Steel Stainless Steel|
|Rough Iron Plate Shrink Section Venturi Tube||200~2800||0.4 ~0.7||1.6||2 ×105~2×106||Carbon Steel Stainless Steel|
|Nominal diameter||Flow range( m3/h )|
|Flow range( m3/h )|
|Flow range( m3/h )|
Venturi flow meter requires considerably shorter straight lengths in comparison to the orifice plates and nozzles. There is a very low loss in pressure on the outlet (from 4 to 20 % of the measured differential pressure) and therefore classical Venturi tube is the highly economic primary element.
MULTIPLE TEMPERATURE COMPENSATION
Multiple temperature compensation, detailed temperature characteristics modification and operation compensation for primary sensor and electronic device conducted by multiple temperature sensors, so that the temperature characteristics can be greatly improved.
HIGH-VELOCITY FLUID FLOW
For the high-velocity fluid flow, e.g. steam, classical Venturi tube has high operational reliability.
NOT CLOGGED WITH SEDIMENTS
Classical Venturi tube is not clogged with sediments.
Classical Venturi tube is proposed and manufactured with regard to customer requirements such as e.g. both sided measurement, heating with sheating, etc. Clas sic Venturi tube can be incorporated both in vertical and horizontal piping.
High-pressure recovery and low upstream and downstream requirements.
Venturi tubes are reliable, easy to use and low-maintenance Venturi tubes are particularly suitable for the measurement of clean liquids and gases.
Using the differential pressure principle to measure the flow rate of pipe water is the most effective and economical option.
- Slurry to even high-temperature Steam,
- Irrigation systems,
- power stations,
- chemical industry,
- Power generation
- Oil production and refining
- Water treatment and distribution
- Gas processing and transmission
- Chemical and petrochemical industry
Venturi Meter is used to measure the velocity of the flow of fluids in a pipe. They consist of a short length of a pipe shaped like a vena contract, or the portion with the least cross-sectional area, which fits into a normal pipe-line. The obstruction caused to the flow of liquid at the throat of the venturi produces a local pressure drop in the region that is proportional to the rate of discharge. This phenomenon, using the Bernoullis equation, is used to calculate the rate of flow of the fluid flowing through the pipe.
The principle behind the operation of the Venturi flowmeter is the Bernoulli effect. The Venturi measures a fluid’s flow rate by reducing the cross-sectional flow area in the flow path and generating a pressure difference. After the pressure difference is generated, the fluid is passed through a pressure recovery exit section where up to 80% of the differential pressure generated at the throat is recovered. The pressure differential follows Bernoulli’s Equation.